Description
Our digital flow meter necessarily has a flow sensor with a magnetic multi-bladed spinning rotor (impeller) mounted inside at right angles to the flow. The rotational speed of the impeller is proportional to the velocity of fluid.
The pulse generated is transmitted and converted into a volumetric measurement. Our digital flow meters are individually calibrated to give reliable flow measurement.
Key Features:
INEXPENSIVE & ACCURATE
All PLASTIC wetted parts
EASY TO INSTALL AND MAINTAIN
HIGH AMPLITUDE OUTPUT signal from sensor eliminates needs of retransmission upto 100 meters.
CERAMIC BEARING for superior low flow performance
Threaded housing allows FIELD MAINTENANCE
This meter can act as:
BATCHER & TOTALISER
Relay gets energized after a fixed quantity of water passes through the sensor. The batcher has an auto reset, manual reset and dual relay operation facility. Batch quantity counts downwards till zero value
FLOW COMPARATOR
The meter is supplied with two sensors for RO permeate and inlet/ reject line. The meter displays both the flow rates and also calculates percentage recovery.
The setting is done on PERCENTAGE RECOVERY
If plant recovery is increased by the client to get more permeate, plant will trip thereby safeguarding expensive membranes
RATE SWITCH MODE
The relay is programmed to energize whenever actual Flow falls below the set value.
Display shows ‘LOW FLOW RATE’
PULSER
Meter can be configured to suit any metering/dosing pump Chemical dosing can be done online proportional to flow.
| DESCRIPTION | SPECIFICATION |
| Type | Full Bore Turbine |
| Fluid | Water |
| S.G.Of Medium | 1 |
| Housing | GF Nylon |
| Impeller | PP |
| Bearing | Ceramic |
| Pin / Shaft | Carbide |
| Sensing Element | Hall Effect I.C |
| Accuracy | ±2% Of Full Scale |
| Maximum Temp | 60° C |
| Maximum Pressure | 5.0 kg/cm2 |
| Pressure Drop | 0.3 Kg/cm 2at Max.flow |
Applications:
1) RO Plant
2) ETP
3) STP
4) Tanker management System
5) Batching Operations
6) Water Distribution Systems
Reviews
There are no reviews yet.