CASH ON DELIVERY
COD Available For Deliveries All Over India
COD Available For Deliveries All Over India
Automated Quantity Discounts
Doorstep Deliveries Throughout India
Technical Specifications
Key Features:
Features
TechFilt's TechRO Spun polypropylene cartridges offer superior sediment reduction. The thermally bonded polypropylene cartridge utilizes the entire depth of its media to effectively trap suspended particles, providing filtration efficiency and consistent flow rate. Features • 4.5"-inch diameters, 20-inch lengths. • 5 micron filtration. • Depth filtration for superior efficiency • Smooth texture for minimal fiber migration • Polypropylene construction for optimal chemical compatibility
For Moderate TDS & Moderate Silica |
|
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron. | |
Description | |
WATREAT – RD300 is a effecient Antiscalent / Antifoulant control agent for reverse osmosis systems. Latest Polymers have been incorporated in the formulation which prevent deposits and protects system. WATREAT RD 300 is highly effective for salts like CaCO3, CaSO4, BaSO4, SrSO4 CaF2. It also effectively disperse soluble and insoluble Iron & Silica. The dispersing action of WATREAT-RD300 helps to keeps the system free from chemical fouling. WATREAT- RD300 is very effective and suitable for potable water systems.
|
|
SALIENT FEATURES
Antiscalant /Antifoulant for RO system Ready to use liquid
Easy to use & safe to handle
|
|
ANALYTICAL DATA
Appearance : Clear colourless to pale yellow color liquid
pH : 6.5 to 7.5
Density : 1.0 to 1.2
|
|
HANDLING INSTRUCTIONS
Keep the container away from direct heat & sunlight. Keep the container closed when not in use. The product should not be swallowed and prolonged contact with the skin should be avoided. Should it come in contact with the eyes, flush with clean, cold water and get medical attention.
|
|
RECOMMENDED DOSAGE
An dosage of 3 - 5 PPM is recommended but this dosage is to be adjusted in such a way that it should give protection to the system, while being economical. Dosage might vary depending on specific system parameter, Kindly refer RO Membrane manufacturer literature for specific product application.
|
Key Features :
The ideal pressure vessel for residential and light commercial water softener/filtration applications. Structural Poly Glass™ Pressure Vessels provide years of reliable service for water conditioning and filtration applications. These tanks offer unmatched strength and chemical resistance.
Key Features :
UKL 4040 Membrane Housing is Suitable for one 4" RO Membrane element Features:
Our Activated carbon is used to an increasing extent in the treatment of water, including drinking water, ground-water, service water and waste water. Its primary role in this context is to adsorb dissolved organic impurities and to eliminate substances affecting odor, taste and color in halogenized hydrocarbons and other organic pollutants. Yet another broad field of application for activated carbon is the treatment, purification and decolourisation of liquids, which is of particular importance in the pharmaceuticals, food, beverage and other allied industries.
Key Features :
1354 TechRO FRP vessel is manufactured with top Quality FRP material with high end precision, these are used in various domestic, commercial and industrial filtration applications. These are cost friendly vessels with long life. TechRO FRP vessels are high standard FRP pressure vessels, applicable for practically any water treatment application. TechRO vessels are made of composite material with filament winding providing strength to withstand high pressures with premium quality finish. These are accepted globally as a superior solution for water treatment. Features of 1354 FRP Vessel TechRO:
ENHANCE FILTRATION PERFORMANCE For all types of swimming pool, water park and water features Create Crystal Clear Water Advantages 1. Cost effective, a direct replacement for silica sand 2. Improve the clarity which overwhelms the result of using silica sand 3. Remove finer impurities than an equivalent grade of silica sand 4. Longer operation life due to higher attrition strength which do not break easily 5. Save water and power for backwashing 6. Suitable for commercial potable water treatment, commercial rapid-rate re-use water filters, waste water treatment, and sewage treatment (lattice structure ideal for biological control)
Radix 95 is a specific antiscalant for Reverse Osmosis Membrane, effective in controlling deposition of inorganic scales.
KEY FEATURES AND BENEFITS :DESCRIPTION | SPECIFICATION |
Type | Full Bore Turbine |
Fluid | Water |
S.G.Of Medium | 1 |
Housing | GF Nylon |
Impeller | PP |
Bearing | Ceramic |
Pin / Shaft | Carbide |
Sensing Element | Hall Effect I.C |
Accuracy | ±2% Of Full Scale |
Maximum Temp | 60° C |
Maximum Pressure | 5.0 kg/cm2 |
Pressure Drop | 0.3 Kg/cm 2at Max.flow |
Being suitable for desalting such water sources as surface water, underground water, tap water and municipal water, etc.,This Membrane is mainly applicable to treatment of various industrial water such as industrial-purpose pure water, boiler water replenishment in power plant, and can be also applied to such brackish water applications as treatment of high-concentrated saline wastewater and production of beverage-purpose water.
1465 TechRO FRP vessel is manufactured with top Quality FRP material with high end precision, these are used in various domestic, commercial and industrial filtration applications. These are cost friendly vessels with long life. TechRO FRP vessels are high standard FRP pressure vessels, applicable for practically any water treatment application. TechRO vessels are made of composite material with filament winding providing strength to withstand high pressures with premium quality finish. These are accepted globally as a superior solution for water treatment. Features of 1465 FRP Vessel TechRO:
TORQUE is CE Certified Brand for Solenoid Valves, These SS 304 CF8 Valves are manufactured through a high end technology with utmost precision. A 25 NB SS304 Normally Closed 2 way Solenoid Valve with a 230 V AC Supply has many features as listed Below.
Port size :
|
1” BSP
|
Body Material :
|
CF8 SS304
|
Pressure Range :
|
0 Bar TO 7 Bar
|
Diaphragm:
|
NBR ( Nitrile)
|
Media Temperature :
|
-5 Deg C TO 90 Deg C
|
Operating Voltage :
|
AC : 230V(50HZ)
|
Media :
|
Air, Water, Gas, Oil,
|
Actuator :
|
Electromagnetic.
|
Features :
|
Mold Round Enclosure Coil with Legpin
|
TORQUE is CE Certified Brand for Solenoid Valves, These Valve are manufactured through a high end technology with utmost precision. A 20 NB Normally Closed 2 way Solenoid Valve with a 230 V AC or 12 V DC Supply has many features as listed Below.
Port size :
|
3/4” BSP
|
Body Material :
|
NV66 (NYLON ABS)
|
Pressure Range :
|
0 Bar TO 7 Bar
|
Diaphragm:
|
NBR ( Nitrile)
|
Media Temperature :
|
-5 DegC TO 90 DegC
|
Operating Voltage :
|
AC : 230V(50HZ) DC: 12V.
|
Power Consumption
|
9W, 11W, 14W.
|
Media :
|
Air, Water, Gas, Oil,
|
Actuator :
|
Electromagnetic.
|
Features :
|
Mold Round Enclosure Coil with Legpin
|
SS Membrane Housing is Suitable for one 4" RO Membrane element Features:
THERMAX TULSION® T-42 Na is a premium quality strong acid cation exchange resin containing nuclear sulphonic acid groups having high exchange capacity, combined with excellent physical and chemical stability and operating characteristics. It is ideally suited for use in a wide range of pH and temperature conditions. CHARACTERISTICS – TULSION® T-42 Na • Type: Strong Acid Cation Exchange Resin • Appearance: Amber color beads • Functional group: Nuclear Sulphonic • Physical form : Moist Spherical Beads • Ionic form : Sodium • Screen Size USS (wet) : 16 to 50 • Particle size (min 95%) : 0.3 to 1.2 mm • Total Exchange Capacity (min) :2.0 meq/ml (Na+) • Moisture content : 45 ± 3% (Na+) • Backwash settled density : 830 – 870 g/l (52-54 lbs/cft) (Na+) • Temperature stability (max) : 280° F / 140° C (Na+) • pH range : 0 to 14 • Solubility : Insoluble in all common solvents OPERATING CONDTION – TULSION® T-42 Na • Maximum operating temp. :140oC (280oF) in Na+form • Resin bed depth (minimum) : 600 mm (24") • Maximum service flow : 120 m3/hr/m3(15 gpm /ft3) • Backwash expansion space : 40 to 75 % • Backwash flow rate for 40 – 70 % expansion : 9 to 25 m3/hr/m2(4 to 10 gpm/ft2) • Regenerant : NaCl for ‘Na’ form • Regeneration level :60 - 160 g NaCl/l (3.7 to 1.0 lbs HCl/ft3) • Regenerant concentration : 5.0 – 15.0% NaCl • Regenerant flow rate : 2 to 16 m3/hr/m3(0.25 to 2 gpm/ft3) • Regeneration time : 20 to 60 minutes • Rinse flow rate : Slow: At regeneration flow rate / Fast: At service flow rate • Rinse Volume : 3 to 5 m3/m3(25 to 40 gal/ft3)
![]() |
![]() |
![]() |
![]() |
![]() |
TechFilt is amongst the leading manufacturers and suppliers of highly commendable range of Water Treatment Plants in India. In order to maintain this market standing, we engage in the utilization of high grade raw materials and modern machines, incompliance with the set industry norms and guidelines. This ensures the product’s strength, capacity, functionality and longer functional life. The qualities that set TechFilt apart from its competitors:
For Moderate TDS & Silica (with Phosphate) | |
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron. | |
DESCRIPTION | |
WATREAT – RD305 is a economical Antiscalent / Antifoulant control agent for reverse osmosis systems. All thelatest Polymers and Phosphonates have been incorporated in the formulation which prevent deposits andprotects system. WATREAT RD305 is highly effective for salts like CaCO3, CaSO4, BaSO4, S.SO4 (CaF2). It also Effectively disperse soluble and insoluble Iron & Silica. Its dispersing action of helps to keeps the system free from chemical fouling. WATREAT-RD305 is very effective and suitable for potable water systems.
|
|
SALIENT FEATURES
Antiscalant /Antifoulant for RO system Ready to use liquid
Easy to use & safe to handle
|
|
ANALYTICAL DATA
Appearance : Clear colourless to pale yellow color liquid
pH : 6.5 to 8.0
Density : 1.0 to 1.1
|
|
HANDLING INSTRUCTIONS
Keep the container away from direct heat & sunlight. Keep the container closed when not in use. The product should not be swallowed and prolonged contact with the skin should be avoided. Should it come in contact with the eyes, flush with clean, cold water and get medical attention.
|
|
RECOMMENDED DOSAGE
An dosage of 3 - 5 PPM is recommended but this dosage is to be adjusted in such a way that it should give protection to the system, while being economical. Dosage might vary depending on specific system parameter, Kindly refer RO Membrane manufacturer literature for specific product application.
|
Being suitable for desalting such water sources as surface water, underground water, tap water and municipal water, etc.,This Membrane is mainly applicable to treatment of various industrial water such as industrial-purpose pure water, boiler water replenishment in power plant, and can be also applied to such brackish water applications as treatment of high-concentrated saline wastewater and production of beverage-purpose water.
TORQUE is CE Certified Brand for Solenoid Valves, These SS 304 CF8 Valves are manufactured through a high end technology with utmost precision. A 50 NB SS304 Normally Closed 2 way Solenoid Valve with a 230 V AC Supply has many features as listed Below.
Port size :
|
2” BSP
|
Body Material :
|
CF8 SS304
|
Pressure Range :
|
0 Bar TO 7 Bar
|
Diaphragm:
|
NBR ( Nitrile)
|
Media Temperature :
|
-5 Deg C TO 90 Deg C
|
Operating Voltage :
|
AC : 230V(50HZ)
|
Media :
|
Air, Water, Gas, Oil,
|
Actuator :
|
Electromagnetic.
|
Features :
|
Mold Round Enclosure Coil with Legpin
|
TORQUE is CE Certified Brand for Solenoid Valves, These SS 304 CF8 Valves are manufactured through a high end technology with utmost precision. A 40 NB SS304 Normally Closed 2 way Solenoid Valve with a 230 V AC Supply has many features as listed Below.
Port size :
|
1.5” BSP
|
Body Material :
|
CF8 SS304
|
Pressure Range :
|
0 Bar TO 7 Bar
|
Diaphragm:
|
NBR ( Nitrile)
|
Media Temperature :
|
-5 Deg C TO 90 Deg C
|
Operating Voltage :
|
AC : 230V(50HZ)
|
Media :
|
Air, Water, Gas, Oil,
|
Actuator :
|
Electromagnetic.
|
Features :
|
Mold Round Enclosure Coil with Legpin
|
TORQUE is CE Certified Brand for Solenoid Valves, These SS 304 CF8 Valves are manufactured through a high end technology with utmost precision. A 25 NB SS304 Normally Closed 2 way Solenoid Valve with a 230 V AC Supply has many features as listed Below.
Port size :
|
1” BSP
|
Body Material :
|
CF8 SS304
|
Pressure Range :
|
0 Bar TO 7 Bar
|
Diaphragm:
|
NBR ( Nitrile)
|
Media Temperature :
|
-5 Deg C TO 90 Deg C
|
Operating Voltage :
|
AC : 230V(50HZ)
|
Media :
|
Air, Water, Gas, Oil,
|
Actuator :
|
Electromagnetic.
|
Features :
|
Mold Round Enclosure Coil with Legpin
|
TORQUE is CE Certified Brand for Solenoid Valves, These SS 304 CF8 Valves are manufactured through a high end technology with utmost precision. A 20 NB SS304 Normally Closed 2 way Solenoid Valve with a 230 V AC Supply has many features as listed Below.
Port size :
|
3/4” BSP
|
Body Material :
|
CF8 SS304
|
Pressure Range :
|
0 Bar TO 7 Bar
|
Diaphragm:
|
NBR ( Nitrile)
|
Media Temperature :
|
-5 Deg C TO 90 Deg C
|
Operating Voltage :
|
AC : 230V(50HZ)
|
Media :
|
Air, Water, Gas, Oil,
|
Actuator :
|
Electromagnetic.
|
Features :
|
Mold Round Enclosure Coil with Legpin
|
TORQUE is CE Certified Brand for Solenoid Valves, These SS 304 CF8 Valves are manufactured through a high end technology with utmost precision. A 15 NB SS304 Normally Closed 2 way Solenoid Valve with a 230 V AC Supply has many features as listed Below.
Port size :
|
1⁄2” BSP
|
Body Material :
|
CF8 SS304
|
Pressure Range :
|
0 Bar TO 7 Bar
|
Diaphragm:
|
NBR ( Nitrile)
|
Media Temperature :
|
-5 Deg C TO 90 Deg C
|
Operating Voltage :
|
AC : 230V(50HZ)
|
Media :
|
Air, Water, Gas, Oil,
|
Actuator :
|
Electromagnetic.
|
Features :
|
Mold Round Enclosure Coil with Legpin
|
TORQUE is CE Certified Brand for Solenoid Valves, These Valve are manufactured through a high end technology with utmost precision. A 25 NB Normally Closed 2 way Solenoid Valve with a 230 V AC or 12 V DC Supply has many features as listed Below.
Port size :
|
1” BSP
|
Body Material :
|
NV66 (NYLON ABS)
|
Pressure Range :
|
0 Bar TO 7 Bar
|
Diaphragm:
|
NBR ( Nitrile)
|
Media Temperature :
|
-5 DegC TO 90 DegC
|
Operating Voltage :
|
AC : 230V(50HZ) DC: 12V.
|
Power Consumption
|
9W, 11W, 14W.
|
Media :
|
Air, Water, Gas, Oil,
|
Actuator :
|
Electromagnetic.
|
Features :
|
Mold Round Enclosure Coil with Legpin
|
TORQUE is CE Certified Brand for Solenoid Valves, These Valve are manufactured through a high end technology with utmost precision. A 20 NB Normally Closed 2 way Solenoid Valve with a 230 V AC or 12 V DC Supply has many features as listed Below.
Port size :
|
3/4” BSP
|
Body Material :
|
NV66 (NYLON ABS)
|
Pressure Range :
|
0 Bar TO 7 Bar
|
Diaphragm:
|
NBR ( Nitrile)
|
Media Temperature :
|
-5 DegC TO 90 DegC
|
Operating Voltage :
|
AC : 230V(50HZ) DC: 12V.
|
Power Consumption
|
9W, 11W, 14W.
|
Media :
|
Air, Water, Gas, Oil,
|
Actuator :
|
Electromagnetic.
|
Features :
|
Mold Round Enclosure Coil with Legpin
|
TORQUE is CE Certified Brand for Solenoid Valves, These Valve are manufactured through a high end technology with utmost precision. A 15 NB Normally Closed 2 way Solenoid Valve with a 230 V AC or 12 V DC Supply has many features as listed Below.
Port size :
|
1⁄2” BSP
|
Body Material :
|
NV66 (NYLON ABS)
|
Pressure Range :
|
0 Bar TO 7 Bar
|
Diaphragm:
|
NBR ( Nitrile)
|
Media Temperature :
|
-5 Deg C TO 90 Deg C
|
Operating Voltage :
|
AC : 230V(50HZ) DC: 12V.
|
Power Consumption
|
9W, 11W, 14W.
|
Media :
|
Air, Water, Gas, Oil,
|
Actuator :
|
Electromagnetic.
|
Features :
|
Mold Round Enclosure Coil with Legpin
|
Radix 95 is a specific antiscalant for Reverse Osmosis Membrane, effective in controlling deposition of inorganic scales.
KEY FEATURES AND BENEFITS :For Moderate TDS & Silica (with Phosphate) | |
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron. | |
DESCRIPTION | |
WATREAT – RD305 is a economical Antiscalent / Antifoulant control agent for reverse osmosis systems. All thelatest Polymers and Phosphonates have been incorporated in the formulation which prevent deposits andprotects system. WATREAT RD305 is highly effective for salts like CaCO3, CaSO4, BaSO4, S.SO4 (CaF2). It also Effectively disperse soluble and insoluble Iron & Silica. Its dispersing action of helps to keeps the system free from chemical fouling. WATREAT-RD305 is very effective and suitable for potable water systems.
|
|
SALIENT FEATURES
Antiscalant /Antifoulant for RO system Ready to use liquid
Easy to use & safe to handle
|
|
ANALYTICAL DATA
Appearance : Clear colourless to pale yellow color liquid
pH : 6.5 to 8.0
Density : 1.0 to 1.1
|
|
HANDLING INSTRUCTIONS
Keep the container away from direct heat & sunlight. Keep the container closed when not in use. The product should not be swallowed and prolonged contact with the skin should be avoided. Should it come in contact with the eyes, flush with clean, cold water and get medical attention.
|
|
RECOMMENDED DOSAGE
An dosage of 3 - 5 PPM is recommended but this dosage is to be adjusted in such a way that it should give protection to the system, while being economical. Dosage might vary depending on specific system parameter, Kindly refer RO Membrane manufacturer literature for specific product application.
|
For High TDS & High Silica | |
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron. | |
DESCRIPTION | |
WATREAT RD 320 is a low pH, silica specific Antiscalent for control scale precipitates and to reduce particulate fouling within membrane separation. This specific product ensures reduced operating and capital cost of RO. It is suitable for brackish water and tap water conataining higher silica compounds including magnesium silicate and aluminium silicate containing feed water. Our WT-RD320 is an aqueous solution of synergistic compounds like carboxylate and polymers, which are adsorbed on the growth sites of the scalents during crystallization and causes crystal to get distorted. It also has a great threshold effect to keep scales into solution and makes the solution highly over saturated. It also has superior dispersion ability by repelling two negative charged particles that makes the agglomeration of particles difficult. It is hydrolytically and halogen compound stability i.e. chlorine, bromine and peracetic acid under normal condition. WATREAT- RD320 is very effective and suitable for potable water systems.
|
|
SALIENT FEATURES
Effectively controls scaling of High TDS and alkalinity level.
Effectively retarding polymerisation and precipitation of high silica in concentrate stream. Also sequests aluminium iron oxides / hydroxide sacling.
Controls sulphates and fluoride scaling.
|
|
ANALYTICAL DATA
Appearance : Pale yellow to off white color liquid
pH : Acidic
Density : 1.0 to 1.2
|
|
HANDLING INSTRUCTIONS
Keep the container away from direct heat & sunlight. Keep the container closed when not in use. The product should not be swallowed and prolonged contact with the skin should be avoided. Should it come in contact with the eyes, flush with clean, cold water and get medical attention.
|
|
RECOMMENDED DOSAGE
A dosage of 3 - 5 PPM is recommended but this dosage is to be adjusted in such a way that it should give protection to the system, while being economical. Dosage might vary depending on specific system parameter, Kindly refer RO Membrane manufacturer literature for specific product application.
|
For Moderate TDS & High Silica | |
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron. | |
DESCRIPTION | |
WATREAT – RD310 is a unique Antiscalent / Antifoulant control agent for reverse osmosis systems. Latest Polymer has been incorporated in the formulation which prevent deposits and protects system. WATREAT RD 310 is highly effective for controlling Silica deposits and it is also useful for salts like CaCO3, CaSO4, BaSO4, SrSO4,CaF2 It also Effectively disperse soluble and insoluble Iron & Silica. The dispersing action of WATREAT-RD 310 helps to keeps the system free from chemical fouling. WATREAT-RD310 is very effective and suitable for potable water systems.
|
|
SALIENT FEATURES
Antiscalant /Antifoulant for RO system Highly effective for Silica inhibition Ready to use liquid Easy to use & safe to handle
|
|
ANALYTICAL DATA
Appearance : Clear colourless to pale yellow color liquid
pH : 6.5 to 7.2
Density : 1.0 to 1.2
|
|
HANDLING INSTRUCTIONS
Keep the container away from direct heat & sunlight. Keep the container closed when not in use. The product should not be swallowed and prolonged contact with the skin should be avoided. Should it come in contact with the eyes, flush with clean, cold water and get medical attention.
|
|
RECOMMENDED DOSAGE
A dosage of 3 - 5 PPM is recommended but this dosage is to be adjusted in such a way that it should give protection to the system, while being economical. Dosage might vary depending on specific system parameter, Kindly refer RO Membrane manufacturer literature for specific product application.
|
For Moderate TDS & Silica (High Alkalinity) | |
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron. | |
Packing: 5kg x 4 nos. | |
DESCRIPTION
WATREAT – RD301 is a unique Alkaline Antiscalent / Antifoulant control agent for reverse osmosis systems. Latest Polymers have been incorporated in the formulation which prevent deposits and protects system. WATREAT RD 301 is highly effective for salts like CaCO3, CaSO4, BaSO4, SrSO4, CaF2. It also Effectively disperse soluble and insoluble Iron & Silica. The dispersing action of WATREAT-RD 301 helps to keeps the system free from chemical fouling. WATREAT-RD301 is very effective and suitable for potable water systems.
|
|
SALIENT FEATURES
Antiscalant /Antifoulant for RO system, Ready to use liquid
Easy to use & safe to handle.
|
|
ANALYTICAL DATA
Appearance : Clear colourless to pale yellow color liquid
pH : 10.0 to 11.5
Density : 1.0 to 1.2
|
|
HANDLING INSTRUCTIONS
Keep the container away from direct heat & sunlight. Keep the container closed when not in use. The product should not be swallowed and prolonged contact with the skin should be avoided. Should it come in contact with the eyes, flush with clean, cold water and get medical attention.
|
|
RECOMMENDED DOSAGE
An dosage of 3 - 5 PPM is recommended but this dosage is to be adjusted in such a way that it should give protection to the system, while being economical. Dosage might vary depending on specific system parameter, Kindly refer RO Membrane manufacturer literature for specific product application.
|
For Moderate TDS & Moderate Silica |
|
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron. | |
Description | |
WATREAT – RD300 is a effecient Antiscalent / Antifoulant control agent for reverse osmosis systems. Latest Polymers have been incorporated in the formulation which prevent deposits and protects system. WATREAT RD 300 is highly effective for salts like CaCO3, CaSO4, BaSO4, SrSO4 CaF2. It also effectively disperse soluble and insoluble Iron & Silica. The dispersing action of WATREAT-RD300 helps to keeps the system free from chemical fouling. WATREAT- RD300 is very effective and suitable for potable water systems.
|
|
SALIENT FEATURES
Antiscalant /Antifoulant for RO system Ready to use liquid
Easy to use & safe to handle
|
|
ANALYTICAL DATA
Appearance : Clear colourless to pale yellow color liquid
pH : 6.5 to 7.5
Density : 1.0 to 1.2
|
|
HANDLING INSTRUCTIONS
Keep the container away from direct heat & sunlight. Keep the container closed when not in use. The product should not be swallowed and prolonged contact with the skin should be avoided. Should it come in contact with the eyes, flush with clean, cold water and get medical attention.
|
|
RECOMMENDED DOSAGE
An dosage of 3 - 5 PPM is recommended but this dosage is to be adjusted in such a way that it should give protection to the system, while being economical. Dosage might vary depending on specific system parameter, Kindly refer RO Membrane manufacturer literature for specific product application.
|
1354 TechRO FRP vessel is manufactured with top Quality FRP material with high end precision, these are used in various domestic, commercial and industrial filtration applications. These are cost friendly vessels with long life. TechRO FRP vessels are high standard FRP pressure vessels, applicable for practically any water treatment application. TechRO vessels are made of composite material with filament winding providing strength to withstand high pressures with premium quality finish. These are accepted globally as a superior solution for water treatment. Features of 1354 FRP Vessel TechRO:
For Moderate TDS & Silica (with Phosphate) | |
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron. | |
DESCRIPTION | |
WATREAT – RD305 is a economical Antiscalent / Antifoulant control agent for reverse osmosis systems. All thelatest Polymers and Phosphonates have been incorporated in the formulation which prevent deposits andprotects system. WATREAT RD305 is highly effective for salts like CaCO3, CaSO4, BaSO4, S.SO4 (CaF2). It also Effectively disperse soluble and insoluble Iron & Silica. Its dispersing action of helps to keeps the system free from chemical fouling. WATREAT-RD305 is very effective and suitable for potable water systems.
|
|
SALIENT FEATURES
Antiscalant /Antifoulant for RO system Ready to use liquid
Easy to use & safe to handle
|
|
ANALYTICAL DATA
Appearance : Clear colourless to pale yellow color liquid
pH : 6.5 to 8.0
Density : 1.0 to 1.1
|
|
HANDLING INSTRUCTIONS
Keep the container away from direct heat & sunlight. Keep the container closed when not in use. The product should not be swallowed and prolonged contact with the skin should be avoided. Should it come in contact with the eyes, flush with clean, cold water and get medical attention.
|
|
RECOMMENDED DOSAGE
An dosage of 3 - 5 PPM is recommended but this dosage is to be adjusted in such a way that it should give protection to the system, while being economical. Dosage might vary depending on specific system parameter, Kindly refer RO Membrane manufacturer literature for specific product application.
|
For Moderate TDS & Moderate Silica |
|
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron. | |
Description | |
WATREAT – RD300 is a effecient Antiscalent / Antifoulant control agent for reverse osmosis systems. Latest Polymers have been incorporated in the formulation which prevent deposits and protects system. WATREAT RD 300 is highly effective for salts like CaCO3, CaSO4, BaSO4, SrSO4 CaF2. It also effectively disperse soluble and insoluble Iron & Silica. The dispersing action of WATREAT-RD300 helps to keeps the system free from chemical fouling. WATREAT- RD300 is very effective and suitable for potable water systems.
|
|
SALIENT FEATURES
Antiscalant /Antifoulant for RO system Ready to use liquid
Easy to use & safe to handle
|
|
ANALYTICAL DATA
Appearance : Clear colourless to pale yellow color liquid
pH : 6.5 to 7.5
Density : 1.0 to 1.2
|
|
HANDLING INSTRUCTIONS
Keep the container away from direct heat & sunlight. Keep the container closed when not in use. The product should not be swallowed and prolonged contact with the skin should be avoided. Should it come in contact with the eyes, flush with clean, cold water and get medical attention.
|
|
RECOMMENDED DOSAGE
An dosage of 3 - 5 PPM is recommended but this dosage is to be adjusted in such a way that it should give protection to the system, while being economical. Dosage might vary depending on specific system parameter, Kindly refer RO Membrane manufacturer literature for specific product application.
|
Pen Type Digital TDS & Conductivity Meter: Our range of portable Pen Type meters are economical range of easy to use and reliable hand held pen type meters. An important feature of the testers is the compact single chamber design. The meter gives accurate readings with its Built-in temperature sensor and can be easily calibrated. The meter is provided with an Auto Off function o enhance the battery life of the LR44 batteries. Also a hold function helps the user to Read and Record results with ease and convenience. These meters are cost effective and come encased in a protective carrying pouch for safety and portability.
Product Specification for "Aster Conductivity Meter,CT 650"
Application
Indication and controller with high relay set point.,Single / dual sensor as per requirement.,Current / printer output
Dimension
96 x 96 x 150mm 92 x 92mm(panel cut out)
Display
4 digit LED 7 SEGMENT
Measurement Range
0.0 to 500 µs/cm(higher ranges optional)
Model
CT 650
Power Supply
230 VAC +/-15% /3 VA
Specifications
Parameter Sampling Rate- 2 seconds, Calliberation -Using Front keypad,Terminals -Sensor screwed type (on pcb) Mains -3-core mains chord through gland.
Temperature
0-60 degree C
Accuracy
+/- 2% of FSD
Display
4 digit LED 7 SEGMENT
Key Features
Sensor provided with proper housing and tee ensuring rigid handling of the sensor. Unique IP 65 enclosure
Panel/field mounted. Stable response, independent of flow. Battery powered.
Traceability to ERTL/NABL standards. Easy calibration using front keys.
Automatic range selection by the processor enabling complete interchangeability.
Individual set point based relay operation. Alam acknowledgement facility.
Programmable control delay. 4-20ma output from meter for your applications. (optional)
Resolution
0.01 to 1 depending on range with auto ranging
Features
Astero™ NXT is a flexible and programmable controller for automation of all water treatment systems. Driven by innovation, Astero™ NXT has an intuitive & user-friendly, patented interface for easy understanding and quick access for critical settings. The Astero™ NXT has Bluetooth® connectivity inbuilt (Optional), and it can pair with your Android mobile devices for easier data monitoring and control, making it possible to transfer and save data. The Astero™ NXT has a Smart Alphanumeric screen and it uses the different colors of the back-lit display to show plant status to ease up the monitoring process. This device has an in-built RS485 communication port for remote data monitoring and is made from strong, rigid materials for durability. Compact Micro-processor based Plug & Play control panels with plant operation programmed and all safeties inbuilt. These panels along with the required level, pressure, conductivity and flow sensors help in making the entire plant completely automatic.
Features
Key Features:
Claim GST Credit On All Your Orders
Get Cashback On All Your Orders
Easy and Flexible Return Options