Automatic RO Control Panel 33 – RO Con

11,696.00 6,021.00

60.21 Cashback

Will be dispatched in 1 day.


EMI Options on Credit Card Available for Cart Value more than Rs. 2000/-

                 !!!BUY MORE TO SAVE MORE OFFER!!!

Quantity Discount

2 - 41%5,960.79
5 - 102%5,900.58
11 - 153%5,840.37
16 - 204%5,780.16
21 +5%5,719.95



RO Con panels are made with current sensing technology which provides auto fault detection for easy maintenance at site.


  • Microcontroller based software Technology.
  • Complete RO logic pre-programmed.
  • 16X2 alphanumeric LCD with mimic diagram and 15LED for front stickers.
  • 4 Dome key based easy programming for more than 20 parameters.


  • Current range from 0.3 – 16 Amps.
  • Two float switches for Raw water tank & Product water tank.
  • Supply  for up to 5 HP three phase  for RWP and 5HP three phase for HPP.
  • Protection from dry run, overload, low voltage & high voltage for RWP and HPP.
  • Panel inputs from LPS, HPS ,2 Float switch, conductivity, 2 flow sensors, 2 pressure transducer.
  • Panel outputs to RWP, HPP , Dosing pump, flushing solenoid valve, Auxiliary output.
  • Protection against extreme high current & phase failure.
  • Microcontroller based digital product with high reliability and long life
  • Can be configured for Auto Mpv’s
  • Compact, vermin proof, rust proof, ABS design.
  • Time Based Password Protection
  • In Panel Calibration Options For Voltage, Ampere and Conductivity.

Additional information

Weight1.55 kg
Dimensions26 × 24 × 13 cm


Input Voltage (AC)250-500 VAC 50Hz
Current Supply range0.3-16 Amps
Overload0.3-16A wide range, default 4A for RWP and HPP
High voltage230-280 V, default 250V
Low voltage150-200 V, default 150V
Dry run/ No load current0.4-16A wide range, default OFF HPP and RWP
RWP dry run trip time delay01-180 sec range, default 180 sec
RWP overload trip time delay01-30 sec range, default 15 sec
HPP dry run trip time delay01-180 sec range, default 180 sec
HPP overload trip time delay01-30 sec range, default 15 sec
HPP operation ON timer1-99 sec , default 15 sec
HPP operation OFF timer01-99 sec , default 15 sec
Dry run auto-start timer for RWP05-720 min, default OFF
Auto flushing valve on time05-100 sec, default 15 sec
Conductivity ignore time01-60 min, default 2 min
Power on timer01-300 sec range, default 60 sec
Conductivity0-200, default 80
Flow Constant 1(6-3000), default OFF
HPP current unbalance20-70%, Default 50%


There are no reviews yet.

Be the first to review “Automatic RO Control Panel 33 – RO Con”

Questions and answers of the customers